Release Notes

Anafi v1.5.6, Anafi Thermal v1.5.6, Skycontroller v1.5.1

Anafi (4K & Thermal)

  • Added hand launch takeoff support in Flight Plan
  • Fixed abnormal LED behavior during firmware update
  • Corrected an issue where the thermal sensor could lag during initialisation

Skycontroller

  • Corrected streaming issues
  • Corrected an issue when logs would not index correctly at the end of a flight

Freeflight 6 v6.5.1, Anafi v1.5.4, Skycontroller v1.5.0

Fixes

  • Fixed an issue when the GPSlapse progress bar would not behave as expected.
  • Once Anafi is restarted, it will now boot to the photo mode last used instead of going back to the default mode.
  • Fixed an issue where the format of Panorama and Burst shots could be inconsistent between the application and Anafi

Freeflight 6 v6.5, Anafi Thermal v1.5.4, Skycontroller v1.5.0

  • Conduct real-time analysis, with a wide array of tools: edit color palette, freeze the view, outline hot or cold spots
  • Control your view and adjust the blending between thermal and visible views
  • Analyze your videos in details, post-treatment, directly from your FreeFlight 6.5-equipped device

This update requires Android 7 or iOS 8 and above.

Freeflight 6 v6.5, Anafi v1.5.4, Skycontroller v1.5.0

New features

  • Custom panorama editor (from 360° captures)
  • Two new photo modes: Timelapse & GPS Lapse
  • Swipeable Gallery
  • Video preview directly from the µSD card
  • FreeFlight 6 now supports iPad®
  • Freeflight is now able to select the best wifi channel in 2.4 GHz and 5.8 GHz

This update requires Android 7 or iOS 8 and above.. If your phone is below the requirement you will not be able to update to Freefligh 6.5

If you update to Freeflight 6.5, please do not use a different device below Android 7 or iOS 8, this could result in elements being misplaced in the HUD and other miscommunication between the drone and the application.

Freeflight 6 v6.4.2 (iOS), Anafi 1.4.0, Skycontroller 3 v1.4.1

Fixes & Improvements

  • Corrected an issue where the thumbnail of a panoramain the gallery could be erroneous
  • Removed display of non selected grid in the viewer while displaying a 360° panorama
  • Adjusted the size of the viewer for a 360° panorama
  • Corrected a display issue on the battery temperature alert message

Freeflight 6 v6.4.1 (Android only), Anafi v1.4.0, Skycontroller v1.4.1

Fixes & Improvements

  • Fixed an issue where the Skycontroller could not be recognized if its firmware was anterior to 1.2.0
  • Fixed an issue where the application could crash when entering the flight HUD if the drone was not updated to the latest firmware

Freeflight 6 v6.4, Anafi v1.4.0, Skycontroller v1.4.0

New features

  • Added a panorama viewer (you can either move around using your finger or by tilting your phone)
  • New photo format: DNG wide + JPEG
  • Your image settings are now stored (Shutter speed, HDR, ISO, WB, contrast, saturation, P-Log, etc..)
  • New SD card gallery display using icons depending on the capture type (Burst, Panorama, Bracketing)
  • Gallery media is now ordered chonologically
  • Introducing a max zoom alert (for both lossless and full zoom) as well as a notification when zoom isn't available (DNG Wide for example)
  • Minimal speed available lowered for even smoother capture
  • Precise hovering now available in Panorama and cineshots (better stability when close to the ground up to around 4 meters or 12 feet)
  • Touch & Fly: now indicates the drone is landed and cannot start Touch & Fly
  • Touch & Fly: The first waypoint must be validated to inititate Touch & Fly
  • Touch & Fly: Made the transition smoother between waypoints
  • Added a "Gimbal calibration is required" alert in Freeflight 6
  • More details show during a motor cutout alert
  • In the drone section, you can now see the status of your GPS connection and the number of GPS you are connected to
  • Sliders for altitude and distance are now using an exponential set of movement

Fixes & Improvements

  • There is no longer a time limit to perform your hand launch once selected
  • Lock AE settings now remain properly after recording a panorama
  • Added date and GPS position in Panorama exif
  • Zoom widget for Follow Me, Flight Plan & Cameraman now appears even if you are not using a Skycontroller 3
  • Improved zoom fluidity
  • Fixed a connection issue to My.Parrot account from Freeflight 6 when the account was created on Parrot.com
  • Better smart "Retun to Home" timing. Makes overall RTH more precise.

 

FreeFlight 6 v6.3.2 (Android), Anafi v1.3.2

Thank you for using Anafi and its dedicated app, FreeFlight 6. We strive to offer you the best possible user experience.

 

In this version the Panorama mode is visible even when Anafi doesn't fly, we improved the stability of the app, and fixed the majority of recent streaming problems. Do not forget to turn off your device's Wi-Fi when you use the Skycontroller 3, and enjoy your flights!

 

Freeflight 6 v6.3.1 (iOS), Freeflight 6 v6.3.0 (Android), Anafi v1.3.0, Skycontroller 3 v1.3.1

New features

  • New “Panorama” photo mode, including vertical, horizontal and 3 different 360 panoramas (Sphere, Tiny Planet, Tunnel)
  • Luminance histogram on the HUD
  • Hatched display of overexposed zones on the HUD
  • New “Intense” and “Pastel” image styles
  • Blurry streaming transition between video and photo modes
  • Introducing a new “Precise Home” function, which enables precise RTH and landing on the take-off point.
  • New selection interface for video and photo modes
  • New progress bar for panoramas, Cineshots and Dronies
  • Introducing a 3s delay when initiating Dronies and Cineshots

  • Availability of the 5.8GHz Wi-Fi band in Europe
  • The edition of Wi-Fi parameters is blocked when ANAFI is flying
  • Possibility to re-center or de-center the subject in “Follow Me”, “Smartdronies” and “Cameraman” modes
  • Metric/imperial system selection
  • Integrated My.Parrot connection, through FreeFlight 6
  • New possibilities for flight sharing
  • Possibility of displaying the password during the typing

Fixes and Improvements

  • Improvement of the compatibility with Huawei devices
  • Improvement of the fixed point (hovering)
  • Improvement of the Smart RTH
  • Improvement of the management of Wi-Fi alerts
  • Rework of the Gallery for an improved user experience
  • Possibility to select quick formatting or in-depth formatting of the microSD card
  • Display of the progression of the formatting of the microSD card
  • Framing reset after stopping a “Follow Me”, a “Smartdronie” or a “Cameraman” session
  • Correction of errors in framing subjects
  • Improvement of batteries’ LED management

Anafi 1.2.4

Fixes

  • Fixed an issue where the gimbal would not incline properly to follow a "Point of Interest" during a Flight Plan
  • Fixed an issue where the photo mode would keep the last selection made instead of going back to the default "Single" mode during a Flight Plan

Freeflight 6 v6.2

Fixes and Improvements

  • Auto-recording of Cineshots and SmartDronies (video mode only)
  • Improved HDR in 4K UHD
  • HDR available in 2,7K and 1080p standard video modes
  • HDR available in JPEG Single and Burst photo modes
  • AE Lock available in PRO mode
  • Bracketing: RAW support
  • Burst : 14 pictures in half a second
  • Improved Smart RTH
  • Touch & Fly mode divided into two sub-modes: Waypoint & POI (point of interest)

New features

  • Pairing of Skycontroller 3 and ANAFI using the provided USB-A to USB-C cable (a µSD card must be inserted into ANAFI)
  • Two new Follow Me modes: Track and Dynamic
  • Smart framing: choose the position of your subject within the frame in Cameraman, SmartDronies and Follow Me modes.
  • Neural Network: double tap to select a person or a car in Cameraman, SmartDronies and Follow Me modes
  • New Dronies: Orbit et Parabola (Smartdronies) Vertigo (Mode POI)
  • New Cineshot : Spiral
  • Spot AE
  • Slow Motion 120 fps (4x slower) in 720p
  • ANAFI yaw speed correlated to zoom factor
  • Gimbal tilt widget on screen
  • Gimbal calibration through the app
  • “Hand launch” tutorial at first access to the HUD
  • High wind alerts on screen

Freeflight 6 v6.1.2 (iOS only)

  • Integration of traditionnal Chinese and simplified Chinese
  • Freeflight 6 now supports Baidu maps for China

Freeflight 6 v6.1.1 (Android & iOS)

Fix

  • The altitude set for the Return To Home function now remains even after restarting the unit.

Freeflight 6 v6.1 & Anafi v1.1.0 (Android & iOS)

Fixes and Improvements

  • The users can now edit the minimum altitude for a Return Home (20m to 100m). 30m is now the default RTH value.
  • ANAFI works better with more Android smartphones resulting to a more stable video streaming

    on Huawei phones.
  • 4K videos can now be downloaded on iPhones in FreeFlight 6 gallery
  • Media can be downloaded on all Android devices

New Features

(You can find an article describing all new features of update 6.1 on our blog here)

  • Burst photo mode captures 10 photos over 1s in Jpeg.
  • Bracketing photo mode allows to take several shots of the same scene using different exposure

    values (-3; -2; -1; 0; +1; +2; +3).
  • Hyperlapse video mode can now speed up to x240.
  • ANAFI is now able to record in 2,7K video resolution in 24, 25, 30 fps.
  • Semi-Auto exposure mode: in Pro mode, the user can choose to let some parameters in

    automatic mode and tune one setting at the time. (Not compatible with HDR)
  • AE-LOCK: it’s now possible to lock the auto exposure over the full screen.
  • Image adjustments fine tuning image settings of Saturation, Contrast, Sharpness.
  • Gimbal alerts in case of Overload or Calibration error.
  • Improvements on formatting SD cards
  • Added a formatting SD progression icon (Spinner)
  • Video recording restarting automatically upon a resolution/FPS/Style/HDR changes
  • Added MPP3 factoy reset (Firmware is not reset)
  • Faster drone update through the Skycontroller 3
  • Added a phone vibration on critical and medium alerts
  • Alerts are now more visible on the bottom of the HUD (SD card, GPS, Follow Me, Geofencing, Auto landing...)
  • Added a forced landing alert
  • Added a countdown before an automatic Return To Home (3..2..1.. RTH)

Anafi firmware v1.0.1

  • Fixes and improvements in image quality
  • Fixes and improvements to the "Return Home" feature
  • Fix in SD card formatting process for Mac OS X compatibility

Skycontroller 3 v1.0.8

  • Changed disconnection delay to SDK (from 60 to 10 seconds)
  • Corrected issue where the controller would not clear the Return to Home alert on the LED when the alert disappeared
  • Notification on wrong WPA key entry
  • Made connectivity between Freeflight 6 and a new drone easier
  • LED is now blinking during fastboot flashing

Skycontroller 3 v1.0.7

  • Slightly faster Anafi update through the Skycontroller3
  • Fix gimbal command after reconnecting to the drone
  • Faster reconnection at the limit
  • Connect to a wall charger or a dedicated USB charging port on a PC (with the thunder symbol) to get the fastest charging speed
  • Limit current delivered on USB A for some non-compliant Android smartphones
  • Better error handling of the Android/Skycontroller 3 connection

Freeflight 6 v6.1 (Android & iOS)

Fixes and Improvements

  • The users can now edit the minimum altitude for a Return Home (20m to 100m). 30m is now the default RTH value.
  • ANAFI works better with more Android smartphones resulting to a more stable video streaming

    on Huawei phones.
  • 4K videos can now be downloaded on iPhones in FreeFlight 6 gallery
  • Media can be downloaded on all Android devices

New Features

  • Burst photo mode captures 10 photos over 1s in Jpeg.
  • Bracketing photo mode allows to take several shots of the same scene using different exposure

    values (-3; -2; -1; 0; +1; +2; +3).
  • Hyperlapse video mode can now speed up to x240.
  • ANAFI is now able to record in 2,7K video resolution in 24, 25, 30 fps.
  • Semi-Auto exposure mode: in Pro mode, the user can choose to let some parameters in

    automatic mode and tune one setting manually. (Not compatible with HDR)
  • AE-LOCK: it’s now possible to lock the auto exposure over the full screen.
  • Image adjustments fine tuning image settings of Saturation, Contrast, Sharpness.

Freeflight 6 v1.0.4 (Android only)

  • Improvements on GPS signal synchronisation with Skycontroller

Freeflight 6 v1.0.3 (Android only)

  • Fixed an issue where editing waypoints, Points Of Interest or segments would close Freeflight 6

Freeflight 6 v1.0.2 (Android only)

  • Improvements on the ergonomics and stability of the app
  • The app will now pick the right units of measure and speed depending on your country
  • Compatibility with new drone firmware and new Skycontroller firmware
Update : 24/06/2019
Cet article vous a aidé ?

 



 

Chat now retract