earth

Improve your navigation

How do I prepare for a flight?

Charge the battery using the enclosed USB-A to USB-C cable and a USB-A power adapter.

Charging times depend on the supply capacity of the adapter. Parrot recommends you always run a full charge of your smart battery before flying your ANAFI series drone.

 

If you want to use the controller and enjoy the full ANAFI series drone experience, charge Parrot Skycontroller 3.

 

Check that your flying zone is safe and clear.

To start the drone, place it on a flat horizontal surface and press the power button.

 

a) If you use Parrot Skycontroller 3, unfold the central part of the controller to power it on, wait for the steady dark blue light, then plug your device to the controller using a USB cable. Parrot recommends you always fly your ANAFI series drone with Parrot Skycontroller 3 and a device, for the best flight experience.

 

b) If you do not wish to use the controller, connect your device to the Wi-Fi network of your ANAFI series drone, using the Wi-Fi settings card located inside the drone’s carrying case, shoulder bag or backpack - SSID format: ANAFI-xxxxx (or ANAFIThermal-xxxxx, or ANAFIUsa-xxxxx).

 

FreeFlight 6 runs automatically on your device and connects to your ANAFI series drone and to Parrot Skycontroller 3.

 

Check for controller and drone software updates.

Calibrate your ANAFI series drone, your Parrot Skycontroller 3, or both, if required, following the instructions on the screen of your device.

 

Check that your flying zone is still safe and clear, and that no one (people, animal) has approached or is approaching your ANAFI series drone.

 

Stay at least 2m (6ft) clear from the drone, press the Skycontroller 3 symbol button and enjoy the flight!