Spare parts

Accessories & spareparts

Battery for Parrot Bebop 2

1 battery for the Parrot Bebop 2 and the Parrot Skycontroller (Black Edition)Rechargeable 2,700 mAh high-density Lithium-ion polymer (11.1 V)Charging time: approximately 55 minutes ...


The Parrot Flypad was specially designed for our flying minidrone range: Swing, Mambo, Airborne Cargo, Airborne Night, and the Hydrofoil hybrid. Through its smartphone mount, you ...

  • Range

    up to 100 m

  • Precise


  • Direct


Bebop 2 FPV backpack

Carry your Parrot drone and Parrot Skycontroller 2 in this sturdy backpack. ...

FPV Pack for Mambo

This pack includes an FPV camera, a Power battery and a pair of Cockpitglasses 2 goggles. Shake up your way of flying and immerse yourself completely in the FPV experienece!

Acrylic adhesive for Parrot AR.Drone 2.0

The double-sided adhesive will help you refurbish broken expanded polypropylene parts on the Parrot AR.Drone 2.0: main body or inner and outer hulls. ...

Parrot AR.Drone 2.0 Battery Charger

The kit includes: 1 LiPo charger (13.5 V/0.9 A) 4 power adapters (United States, United Kingdom, Europe, Australia, New Zealand, Japan).

34,99 €

Parrot AR.Drone 2.0 lower body

The body of the Parrot AR.Drone 2.0 is made of expanded polypropylene, a material that combines lightness and strength. It contains the battery compartment. It is positioned ...

Parrot AR.Drone 2.0 brushless motor

The brushless motors were specially designed for the Parrot AR.Drone 2.0 to ensure optimum performance and a long life. The 15 W motors operate at 28,000 rpm in stabilised flight, ...

Parrot AR.Drone 2.0 central cross

The central cross makes up the backbone of the AR.Drone 2.0. The tubes are made of carbon, and the motor brackets are made of PA 6.6 plastic. These materials were selected to make ...

Parrot AR.Drone 2.0 gears and shafts

The gears and shafts connect the motors to the propellers. ...

Indoor Hull for Parrot AR.Drone 2.0 Elite Edition - Sand

Enjoy flying indoors with this shaped hull made of EPP (expanded polypropylene), which is both light and solid. The indoor hull is attached to the body of the AR.Drone 2.0 Elite ...

Navigation card for Parrot AR.Drone 2.0

The navigation card is equipped with several sensors to ensure the stability of the Parrot AR.Drone 2.0.

Motherboard for AR.Drone 2.0

The motherboard of the AR.Drone 2.0 includes a 1 Ghz ARM Cortex A8 microprocessor and an 8 Ghz video DSP. It also has 1 GB of 200 MHz DDR2 RAM and an Atheros Wi-Fi chip.The AR ...

Outdoor hull for Parrot AR.Drone 2.0

Enjoy flying outdoors with this hull made of expanded polypropylene (EPP), a material that is both light and strong. The outdoor hull is attached to the body of the Parrot AR.Drone ...





Chat now retract