Resetting the Skycontroller USA reverts the controller back to its latest firmware update.
It cleans all logs and credentials and restores the original ecosystem’s Wi-Fi SSID and password.
To reset the Skycontroller USA, ensure that it is not connected to any drone, or the drone will initiate a take-off sequence.
Press and hold the controller’s Take-off/Landing, Optics reset, and Media recording buttons for 15 seconds, then release the 3 buttons.
Note: The LED starts flashing after 10 seconds, but you must hold the buttons for an additional 5 seconds.
The Skycontroller USA reboots. The reset is successful.
The same procedure can be performed safely, even with a drone connected, through the Reset button of the Skycontroller USA page, in FreeFlight 6 USA.
