Extracting the microSD card
To extract the microSD card from your ANAFI series drone, the battery must be removed from the drone: when you remove the battery from the body of the drone, you uncover the microSD slot, which is protected by a small metal lock.
Slide this metal lock with a finger toward the back of the drone to open it – you will feel a slight click. Lift the front part of the lock to open the slot. Reach the microSD card and extract it. An open lock icon and an arrow, located on the left of the microSD slot, confirm to you the way you must slide the lock to open it.
Installing the microSD card
To install the microSD card back into its slot, open the metal lock as you did when you extracted the card from the drone. Position the microSD card into its keyed slot: make sure the metal contacts of the card are facing down and set on the contacts of the drone. The shortest side of the microSD card should be facing toward the back of the drone.
Tilt the metal lock over the microSD card. Press a finger gently on the lock and slide it toward the front of the drone to close and lock it – you will feel a slight click. A closed lock icon and an arrow, located on the right of the microSD slot, confirm to you the way you must slide the lock to close it.
