Accessories & Spareparts

Accessories & Spareparts

Select your product to see the corresponding spare parts.

Most popular products

Propellers for Parrot AR.Drone 2.0

Propellers are marked either "C" (for 'clockwise') or "A" (for 'anticlockwise'). The propellers should be mounted as follows, motor 1: "C", motor 2: "A", motor 3: "C", motor 4: "A ...

$11.99

Parrot AR.Drone 2.0 gears and shafts

The gears and shafts connect the motors to the propellers. ...

$10.99

Parrot AR.Drone 2.0 central cross

The central cross makes up the backbone of the AR.Drone 2.0. The tubes are made of carbon, and the motor brackets are made of PA 6.6 plastic. These materials were selected to make ...

$29.99

HD Battery for AR.Drone 2.0

The HD (High Density) battery is a three-cell Lithium-Polymer battery with a capacity of 1500 mAh at 11.1 volts and a discharge capacity of 10C. It includes a protection circuit ...

$59.99

Toolbox for Parrot Bebop and Parrot Minidrones

Now you can disassemble and change spare parts yourself. This toolbox includes a Phillips screwdriver to disassemble and reassemble the motors as well as a set of Torx screwdriver ...

$19.99

Parrot AR.Drone 2.0 screws

Parrot Screws for Parrot AR.Drone 2.0The Parrot AR.Drone 2.0 is assembled with three types of screws: ...

$6.99

Parrot Propellers for AR.Drone 2.0 Elite Edition - Sand

These propellers were designed specially for the AR.Drone 2.0 Elite Edition by the winning team of the microdrone competition organised by the DGA (the French Defence Ministry's a ...

$11.99

Outdoor hull for Parrot AR.Drone 2.0

Enjoy flying outdoors with this hull made of expanded polypropylene (EPP), a material that is both light and strong. The outdoor hull is attached to the body of the Parrot AR.Drone ...

$24.99

Outdoor hull for Parrot AR.Drone 2.0

Enjoy flying outdoors with this hull made of expanded polypropylene (EPP), a material that is both light and strong. The outdoor hull is attached to the body of the Parrot AR.Drone ...

$24.99

Outdoor hull for Parrot AR.Drone 2.0

Enjoy flying outdoors with this hull made of expanded polypropylene (EPP), a material that is both light and strong. The outdoor hull is attached to the body of the Parrot AR.Drone ...

$24.99

Motherboard for AR.Drone 2.0

The motherboard of the AR.Drone 2.0 includes a 1 Ghz ARM Cortex A8 microprocessor and an 8 Ghz video DSP. It also has 1 GB of 200 MHz DDR2 RAM and an Atheros Wi-Fi chip.The AR ...

$109.99

Navigation card for Parrot AR.Drone 2.0

The navigation card is equipped with several sensors to ensure the stability of the Parrot AR.Drone 2.0.

$69.98

Indoor Hull for Parrot AR.Drone 2.0 Elite Edition - Sand

Enjoy flying indoors with this shaped hull made of EPP (expanded polypropylene), which is both light and solid. The indoor hull is attached to the body of the AR.Drone 2.0 Elite ...

$45.99

Parrot AR.Drone 2.0 brushless motor

The brushless motors were specially designed for the Parrot AR.Drone 2.0 to ensure optimum performance and a long life. The 15 W motors operate at 28,000 rpm in stabilised flight, ...

$49.99

Parrot AR.Drone 2.0 lower body

The body of the Parrot AR.Drone 2.0 is made of expanded polypropylene, a material that combines lightness and strength. It contains the battery compartment. It is positioned ...

$59.99

 



 

 




 

Chat now retract