The software version that you have just downloaded is now stored on your hard disk.
To update other control boxes from a software version stored on the hard disk, proceed as follows :
- A) Connect the flash cable :
-
- For a control box of range 3000, connect the female connector of the flash cable (9 pins) on the serial port of your computer and the mute connector (10 pins locating pins upwards) on the output MUTE SPEAKER of the control box.
- B) Connect the power supply cable (adapter sector) on a catch sector 220 Volts.
Do not connect the white connector now.
- C) Run the utility program :
1.To run Parrot Flash Update, Double-click Parrot Flash Update icon or Click on Start à Programs à Parrot Flash Update : a window is displayed on the screen.
2. Select the port COM in use (Serial Port COM1). Click on the arrow, a drop-down menu appears on which you must select the port COM you want to use (default: COM1).
3.Select the device that you will update (Device:). Click on the arrow, a drop-down menu appears on which you must select the device you will update (CK3000, HF3000 or VH3000).
4.Click on Load File -> Folder "Internet Files", You must select the desired software version, then Click on open. The software version appears then on the right of Load File.
5.Click on START.
6.A message appears in window RESULTS inviting you to connect the control box power supply (white connector). Now connect the white connector on the control box.
7.The software update starts (its unfolding is displayed in window RESULTS).
8.1. When the update is finished, Flash OK appears.
A window appears inviting you to disconnect the white connector of the control box.
Click on OK. Disconnect the power supply connector (white connector) and flash cable from the control box.
8.2. Wait at least twenty seconds before giving the hands free system under tension.
|
