Nokia Wireless Audio Adapter AD-5B

Audio Profiles supported: HEADSET. The Nokia Wireless Audio Adapter enables the use of headsets with Bluetooth technology with Nokia phones that have a Pop-Port connector but not offer integrated Bluetooth functionnality. Compatible with the following Nokia phones: 3100, 3200, 5100, 5140, 6100, 6220, 6610, 6800, 7200, 7210, 7250/7250i.

• Control key: Switches the adapter on and off. The control key also changes modes in the adapter.
• Indicator light: Displays the current status of the adapter:
  1. Slow red blink: The adapter is in the init mode. This means that the dapter is attached to a phone.
  2. Fast green blink: The adapter is either in inquiry mode, which means that the adapter is searching for a headset with Bluetooth technology. If a headset is found, the adapter switches itself to pairing mode, else it returns to init mode.
  3. Continuous green: (on for 20 seconds) The adapter is in pairing mode. This means you have 20 seconds to start keying in the Bluetooth passkey on your phone. If the pairing is successful, the adapter switches to idle mode. If the pairing fails, the adapter returns to init mode.
  4. Green blink: The adapter is in the idle mode. A car icon is shown on the phone display. The phone and the car kit are now ready to be used.
  5. Slow green blink: The adapter is in the audio linked mode, which means that there is a call in progress and the audio has been linked to the headset.
  6. Alterning red and green blink for 10 seconds: The adapter is in the reset mode. When the reset has been successful, the indicators blinks red.
  7. No indication from the light indicator: The adapter is in power saving mode, which means that it is switched off. When the adapter is switched off, the light indicator blink once in red for confirmation. In this mode the car icon disappears from the phone display and the calls are routed to the phone normally. To return to init mode, press control key once.

	Pairing Devices
	Using Phone-specific Features
	Bluetooth® Phones