Pairing Devices

You need to pair devices when powering up CK3000/DriveBlue for the first time or after resetting your handsfree. Subsequently, all connections between your phone and CK3000/DriveBlue are automatically established when both devices are within a few meters range of each other. A 'beep' is played when the connection is established.

Procedure

Turn the ignition key and you should hear the « Please pair device » instruction for the first time. If not, reset your CK3000/DriveBlue unit.

Note: Before pairing, you have to turn ON the discoverable option in the Bluetooth menu.

From your phone, press MENU, select EXTERNAL CONNECTION.
Select BLUETOOTH.
The DISCOVERABLE mode have to be ON.
Push the button with the 3 blue points (above the blue central button).
Then select SEARCH (waiting...).
Select "Parrot CK v...", enter 1234 as Bluetooth PIN code, press OK (waiting...).
After hearing a 'beep', press once the green button to establish the connection.
Then a "B" (as the Bluetooth logo) is displayed and flash on and off on the top of the screen when the connection is active.

Known issues with this phone: Each time you turn on the ignition, press once the green button to totally establish the connection between the two devices (a "B" as Bluetooth logo is displayed and flash on and off on the top of the screen).

	Training Names

	Using Phone-specific Features

	Nec E616/C616

	Bluetooth® Phones

Browser Based Help. Published by chm2web software.