How can I update the Parrot kit's software?

To update the DriveBlue kit, there are 2 ways:

1- By Bluetooth:

You only need a PC, a Parrot Flash kit, a Parrot serial cable and the Parrot Flash Update wizard software.

In order to update your kit, please follow these steps:

- Download and install the Parrot Flash Update wizard.

- Connect your PC and your Parrot Flash kit with the Parrot serial cable.

- Don’t switch on your DriveBlue.

- Start the Parrot Flash Update wizard.

- Click on  “Next “.

- Select the kind of Parrot Flash kit you want to update: DriveBlue FOB.

- Click on “Next “.

- Click on “Download latest version”.

- Wait until the following window appears:

- Click on "Download now".

- Wait until the following window appears:

- Click on “OK“.

- Click on “Next “.

- Select the port which is connected to your car kit

- Click on “Next “.

- When the Parrot Flash Update Wizard reaches the “XPRAM downloading”, switch on your Parrot Flash kit.

- Wait until the Parrot Flash Update wizard completes all of the steps.

- Click on “Next “.

- Click on “Finish “.

- Disconnect the Parrot Flash kit from the PC.

- Connect the Parrot Flash kit to the cigar lighter of your car.

- Wait until your DriveBlue beeps.

- Press the green button of your DriveBlue car kit.

- Wait until your DriveBlue car kit indicates that the update is complete (you should hear “Software update completed…Please pair device”.

- Disconnect the Parrot Flash kit from the cigar lighter.

- Wait your DriveBlue car kit reboots. This can take up to a few minutes. Do not remove your car kit in the mean time

2- Contact your dealer.

He is always available to help you.